Succulents are some of the decade’s most popular houseplants. Since these adorable plants are typically small enough to group into fun arrangements, more and more people are getting crafty to find new and unique ways to display their succulents. One of our favorite looks is the driftwood succulent planter. Whether you’ve collected some driftwood from Iowa‘s lakes and rivers or brought some home from a trip to the coast, these planters are a great way to use driftwood as part of your home decor.
The dry and weathered wood is a perfect match for succulents. It’s very similar to the dry, natural surroundings that wild succulents thrive in. With a few supplies and a handsome chunk of driftwood, you can make your own DIY driftwood succulent planter.
Optional: A drill and a Forstner or spade drill bit, or a Dremel with a cutting bit
How to Create a Driftwood Succulent Planter
Clean up your driftwood. If it’s dirty, rinse off any dirt or sand. If you’re worried about bugs in your driftwood, you can bake it in the oven at 250º for 2 hours. If you line a baking tray with parchment paper, it makes cleanup a lot easier when you’ve finished baking the wood.
Once your driftwood is at room temperature again, decide how you want to position it. Usually, its most stable resting position is best if you’re going to use it as a centerpiece or mantel ornament. If you want to hang it, you can choose whatever angle you like best.
If your driftwood does not have any gaps or holes deeper than ¼”, you may need to make the gaps deeper and wider or drill holes with a spade or Forstner drill bit. Don’t drill all the way through, however. The holes for soil only need to be about ¼-½” deep.
Once you’ve decided where you’re going to place your succulents, glue a thin layer of sphagnum moss into the bottom of those spots. This will help to keep the soil in, so it doesn’t wash away as soon as you water your plants.
Then, fill your gaps or holes with a little bit of cactus potting soil. You don’t need much, but enough to give the succulents somewhere to develop a few roots.
Clean off excess dirt on your succulents.
Decide on your plant placement, but don’t put them in just yet.
Once you’ve decided where you want your plants, glue some more sphagnum moss around the edges of those areas.
Place one or two tiny dabs of glue on the underside of a couple of the leaves of your succulents, and press it into its new location, so the glue sticks to the sphagnum moss.
Continue gluing in each of your succulents. Remember not to cover the base in glue completely, or the plant won’t be able to put out any roots and will die fairly quickly.
Once all your gaps are full of succulents, let your finished driftwood planter set overnight.
The next day, water your succulents with just a little bit of water—you may need a syringe or eye-dropper to get the water in the right place. Remember, succulents don’t need much water.
Congrats, your succulent planter is complete! When you water it in the future, you may want to set it in the sink or on a tray to make sure you catch any drips. If any of the plants die, simply pull them off and glue a new one in its place. If you’d like to hang your succulent planter, you can loop some strong twine, double-looped fishing line, or rope around the ends and hang it however you please.
Ready to make your own DIY driftwood succulent planter? Come on down to our garden center; we’ve got everything you need to get started, including a large selection of fun and unique succulents!
Succulent Crafts: Wreaths, Driftwood, and Frames with Succulents
The Ted Lare Look
Succulents are the gardening world’s current favorite, skyrocketing in popularity due to their unique jewel tones and stunningly symmetrical appearance, but solidifying their place as reigning popularity royalty thanks to their versatility. Succulents are absolutely everywhere, and for those of us that crave a little bit of a DIY touch to our home decor, they are the perfect opportunity to get our hands busy.
Here are some of our favorite ways to get crafty with succulents and create lasting living arrangements that are sure to be the centerpiece and talking point of any room.
How To Make Succulent Wreaths: Wreaths aren’t just for the holidays, and you can use this popular style and shape to make a creative decoration to enjoy all year. Most plants would never be able to tolerate an environment growing vertically on display, but succulents have strong roots and are adaptable enough to flourish – even sideways.
Gather all of your succulents and materials before you get started. Make sure that the wire wreath frame you choose is strong and specifically made for planting live plants. From there, there are a few different methods to choose from, depending on what you’re interested in and what works for your home decor:
Burlap and soil: You’ll need burlap, a wire wreath form, cactus or succulent soil, some fibrous material (like coco fiber), a hot glue gun, and your favorite selected small succulents.
Place the burlap liner inside your wreath form, molding it to the shape. Next, you’ll cut a hole in the center of the wreath and trim off the excess burlap, allowing the fabric to extend a few inches past the edges of the wreath. Fill the wreath with cactus soil, packing it in firmly. Cover the soil with a piece of coco fiber or other fibrous material and use hot glue to fasten everything together to enclose the soil underneath. Fasten the back of your burlap ring to the wreath, and you’re ready to plant.
Use scissors to cut holes in the burlap liner to expose the soil underneath, and then plant the loosened roots of your succulents right into the holes.
Sphagnum Moss: If the burlap method sounds too complicated and messy, a sphagnum moss frame is a great way to tidy the process up a little. It’s also the perfect choice for succulent cuttings that don’t have a great root system yet. You can purchase them ready to plant or you can make your own by filling up a tube of nylon mesh with loose moss. Soak your sphagnum wreath in water before you place it in your wireframe to get started.
Poke a hole in your frame through the mesh liner, and make space for your succulent or succulent cutting. Try mixing and matching bigger and smaller plants to create an exciting display full of color and texture. Once you have your wreath planted, you can tidy up the look by inserting some soft moss in the gaps to cover up the form underneath.
Lay your succulent wreath flat for a week or two after you build it so that the roots have time to establish themselves before their gravity-defying trick of growing horizontally. We also suggest laying your wreath flat when you water it, too, for better coverage and drainage.
Easy Succulent Driftwood Planter: Why buy a boring planter when there are perfectly good spots for your succulents in a cool piece of wood? Filling in all of the nooks and crannies of driftwood with succulents and moss is a great, earthy, and natural display piece that will catch the eye with unique forms and shapes to match its succulents.
You can shortcut and simply hot glue the succulents straight onto the driftwood, but giving them something for a base will help them to grow roots and last much longer. Glue some moss to your driftwood first to create a long-lasting display sure to please.
Finish off your artwork by fastening your succulents to the mossy areas – use hot glue, floral glue, fishing line, or craft wire for a secure but polished look. If your driftwood has any deep holes, you can always fill them with moss and cactus soil and plant your succulent straight into your display. Mist your plants to keep them happy and beautiful for longer.
How to Make a Succulent Picture Frame: What’s inside the picture frame is normally the most important part – displaying photos of loved ones and favorite memories to be treasured forever. We love the idea of making your home personal with photos, but your picture frame decor should match what you love! Picture frames and shadow boxes are actually idea homes for your favorite succulents!
For this DIY, you’ll need a shadow box or a glass panel picture frame with the back removed and some wood to make your own shadow box. We like using frames and boxes made of redwood and cedar, as they’re naturally water-resistant and will hold up more to time spent as an impromptu container. You’ll need hardware cloth, cactus soil, succulents, and cuttings – as well as some household tools, like a staple gun, a hammer, and some nails. Cuttings from plants should be given a few days to dry before you replant them, while whole plants can be planted directly.
If you don’t have a shadow box, you’ll be creating one with your picture frame to give your succulents’ roots space to grow. Staple hardware cloth and insert it halfway into the box. You’ll be using this to push the roots of your plants through to keep them anchored, so midway or even at the top under the frame of your box is ideal. A half-inch grid should be enough to accommodate your stems but keep the soil locked in.
Fill your shadow box with cactus soil by pouring it on top of the hardware cloth and sifting it through the openings. Use a pencil to poke holes in the soil through the square holes in the grid and fill your frame up with plants! We recommend starting with your larger plants and moving toward smaller ones to fit them in more nicely next to each other – even if you have a favorite that you want to make sure is on display the most.
Like the succulent wreath, leave your box laying flat for a few weeks to let the roots start to settle and establish – as well as using greenings clips to keep everything in place. When your plants have rooted, you can hang your frame or prop it up on a shelf for a living display to go along with all of your favorite memories and photos.
Succulents in Troughs: For a display that’s a little more common sense and straight-forward, plant your succulents in a trough. They’re still more creative than a normal succulent container display with old planters, but they are more manageable for people that aren’t sure of their DIY capabilities. Choose from wood, terra cotta, metal, plastic, and even cement troughs for your plants, creating an aesthetic that both matches your decor and draws the eye. You can accentuate your darling succulents while still creating a lasting impact in your home’s style.
Once you’ve selected a trough planter, make sure that it is designed for drainage. If it has a solid bottom, you might want to drill some holes before filling with soil and planting or just layer the bottom with pebbles to improve drainage. Then, all you have to do is fill the trough with cactus soil and you’re ready to plant! These are the perfect planters for a tidy and neat succulent planting design to meet rustic style with your fun and unique container.
Once you start to think about the different and unique ways that you can plant beyond regular containers, the possibilities with succulents are endless. These are just a few of our favorite, creative DIY displays we’ve seen people come up with. Creating your own display is a fun craft, and it’s a perfect way to mesh together your personal style and personality with your home decor for something uniquely you.
Ted Lare Design Build specializes in Des Moines Landscaping Design and Installation.
We cover a wide range of Central Iowa. We have installed landscapes for many years in all areas of the Des Moines metro, including West Des Moines, Des Moines, Waukee, Clive, Urbandale, Johnston, Ankeny, Altoona, Indianola, and Norwalk.